Clogged nozzles, screens and filters cleaned or replaced so spray patterns return to normal and coverage is even again.
Small bits cause big sprinkler problems. Sand, grit, algae, insects and mineral scale can block a nozzle opening or choke a filter screen, so spray comes out as a dribble, a lopsided fan or not at all. Wells and pond water make it worse. The lawn under a clogged head dries out and turns brown, while the rest of the zone keeps getting watered normally, and the cause is often hiding in a spot no one has looked at closely.
We pull each nozzle and screen, clean them and rinse the line. Worn or damaged nozzles are replaced with matching ones. We also check filters at the head, at the valve and at the supply for drip systems, clean or replace the elements and flush the lines. Where debris is a constant problem, we add or upgrade filtration, and we look for the source, such as a cracked pipe pulling in dirt. A brief tune-up like this often restores a zone to like new.
Each nozzle and screen is removed, cleaned and tested, so the spray pattern comes back to normal.
Head, valve and drip filters are cleaned or replaced, and lines are flushed of debris.
Nozzles with eroded openings are replaced with matching ones so output is even.
If debris keeps coming, we look for a leak, a broken pipe or a source problem and fix it.
Drag the handle to compare.
BeforeAfterSpray restored.
Lines cleared.
Matched nozzles.
Even output.
No repeat clogs.
Coverage confirmed.
Every topic has its own page with what to expect and how we approach it.
Home situationEstates and Large AcreageBig properties need big-picture irrigation: pumps, long runs, many zones and smart control. Here is how to plan…Learn more 
Home situationOlder Homes and Existing LawnsMature lawns, old systems and tree roots call for careful work. Here is how to add or renew…Learn more 
Home situationSloped and Hilly YardsWater runs downhill, and so does your water bill. Here is how to irrigate slopes without runoff, dry…Learn more Check the signs you see in your yard and get a likely cause with the next step.
You tell us about your yard and what you want, a new system, a repair or a tune-up, and we set a visit that fits your day.
We walk the property, find the water source and valves, test pressure and flow, look at every head and zone and take photos of anything of note.
We explain your options for zones, heads, drip, controllers and savings, sketch the layout and give you a written scope with clear timing and pricing.
We arrange for underground utilities to be located, protect the lawn, driveways and beds and mark every head, valve and pipe run before we dig.
We install or repair pipe, valves, heads and wiring with the right parts for each zone, flush the lines and keep the site tidy as we work.
We program the controller, test every zone with you, walk through watering and winterizing in plain steps and set a reminder for your next check.
A clogged nozzle or screen is a common cause. Cleaning or replacing them often fixes it.
Once a year during a tune-up, and more often with well or pond water.
Fine debris, minerals and algae can block emitters. Clean filters and regular flushing prevent it.
Yes, with care. Turn the head, pull the screen and rinse it. We can do it quickly across the whole system.
Often. If the nozzle is worn or damaged, we replace it with a matching one.
Sprinkler RepairFast, careful sprinkler repair that finds the real cause, fixes it properly and leaves your system running evenly…Explore 
Mid-Season Tune-UpA summer checkup that cleans nozzles, adjusts heads, fixes small leaks and resets schedules, keeping your lawn green…Explore 
Drip RepairClogged emitters, chewed tubing, popped fittings and dry plants fixed, with filters and flow checked so the drip…Explore 
Nozzle UpgradesRotary and matched-precipitation nozzles installed to apply water more slowly and evenly, cutting runoff and waste without replacing…Explore Tell us about the project and we will call you back to talk it through.
Or call (615) 357-7797 to talk now.
