Cracked and cut sprinkler pipe repaired with proper fittings, tested under pressure and buried with the lawn put back in good shape.
A line break is the repair that gets noticed. Water bubbles to the surface, a spot of lawn turns into mud and pressure drops across the system. Pipes break when a shovel or trencher cuts them, when tree roots push against them, when ground shifts or when water freezes inside. Whatever the cause, a broken line should be dealt with quickly, because it wastes water and washes away soil around it.
We shut off the zone, locate the break and dig carefully by hand near the pipe. We cut out the damaged section and join new pipe with proper couplings, using the right glue for PVC or compression fittings for poly. We flush dirt from the line before reassembling and test it under pressure before we backfill. Soil is compacted in layers and sod is replaced, and we look along the same pipe for other weak spots, especially after a freeze.
We shut off the zone and limit water loss and soil washout, then locate the break.
Digging near the pipe is done by hand so the repair does not cause more damage.
The right couplings and glues or fittings for your pipe type keep the repair strong.
We clear debris and test under pressure before backfilling, so the repair holds.
Drag the handle to compare.
BeforeAfterCracked or cut pipe.
Fast response.
Right glue or coupling.
Before backfill.
Lawn restored.
Other weak spots.
Every topic has its own page with what to expect and how we approach it.
Home situationClay Soil YardsMuch of Middle Tennessee sits on clay, which drinks slowly and holds water. Here is how to water…Learn more 
Home situationOlder Homes and Existing LawnsMature lawns, old systems and tree roots call for careful work. Here is how to add or renew…Learn more 
Home situationEstates and Large AcreageBig properties need big-picture irrigation: pumps, long runs, many zones and smart control. Here is how to plan…Learn more Check the signs you see in your yard and get a likely cause with the next step.
You tell us about your yard and what you want, a new system, a repair or a tune-up, and we set a visit that fits your day.
We walk the property, find the water source and valves, test pressure and flow, look at every head and zone and take photos of anything of note.
We explain your options for zones, heads, drip, controllers and savings, sketch the layout and give you a written scope with clear timing and pricing.
We arrange for underground utilities to be located, protect the lawn, driveways and beds and mark every head, valve and pipe run before we dig.
We install or repair pipe, valves, heads and wiring with the right parts for each zone, flush the lines and keep the site tidy as we work.
We program the controller, test every zone with you, walk through watering and winterizing in plain steps and set a reminder for your next check.
Turn off the system at the main valve, then call us. Quick action limits wasted water and damage to the yard.
Both are common in irrigation. We repair the pipe you have, using the right method for each.
Often six to twelve inches, but depth varies. That is why we call for locates and dig carefully.
We replace sod and restore soil, and with good watering most repairs blend in within a few weeks.
Yes. Blowing out the lines before winter removes the water that freezes and splits pipe.
Leak Detection and RepairHidden leaks found with careful testing and repaired with minimal digging, so you stop wasting water and stop…Explore 
Emergency RepairUrgent help for geysers, flooding, runaway zones and frozen or broken lines, with quick shut-off advice and fast…Explore 
Freeze Damage RepairCracked pipe, split fittings, broken valves and damaged backflow devices found and repaired after a freeze, with a…Explore 
Winterization and BlowoutCompressed-air blowouts that clear water from your lines, valves and heads before freezing weather, protecting pipes and parts…Explore Tell us about the project and we will call you back to talk it through.
Or call (615) 357-7797 to talk now.
