Fast, careful sprinkler repair that finds the real cause, fixes it properly and leaves your system running evenly again.
A sprinkler system that is not working usually shows it in the yard first: a brown patch, a soggy corner, a head that sprays the street or a zone that never comes on. The cause could be a cracked head, a clogged nozzle, a failing valve, a broken wire or a controller setting. Guessing wastes money, and a quick swap of one part often leaves the real problem in place.
We troubleshoot the whole system. We run each zone, watch every head, check pressure and look at valves and wiring, then repair what is actually wrong with parts that match the existing system. We replace worn heads and nozzles, fix leaks, adjust coverage and test again before we leave. You receive a plain summary of what we found and what we did, along with any other issues worth watching, so repairs are fixes rather than patches.
We run every zone and test pressure, valves and wiring so the repair fixes the true cause.
Heads, nozzles and valves are matched to your system so coverage stays even.
While we are there, we look over every zone and flag other problems before they grow.
You get a clear summary of what was wrong, what we repaired and what to watch.
Drag the handle to compare.
BeforeAfterNot just a quick swap.
Nothing missed.
Flow verified.
After every repair.
Fits your system.
Clear next steps.
Every topic has its own page with what to expect and how we approach it.
Home situationOlder Homes and Existing LawnsMature lawns, old systems and tree roots call for careful work. Here is how to add or renew…Learn more 
Home situationClay Soil YardsMuch of Middle Tennessee sits on clay, which drinks slowly and holds water. Here is how to water…Learn more 
Home situationHOA and Common AreasEntrances, medians and amenity lawns are a neighborhood calling card. Here is how boards can keep irrigation reliable…Learn more Check the signs you see in your yard and get a likely cause with the next step.
You tell us about your yard and what you want, a new system, a repair or a tune-up, and we set a visit that fits your day.
We walk the property, find the water source and valves, test pressure and flow, look at every head and zone and take photos of anything of note.
We explain your options for zones, heads, drip, controllers and savings, sketch the layout and give you a written scope with clear timing and pricing.
We arrange for underground utilities to be located, protect the lawn, driveways and beds and mark every head, valve and pipe run before we dig.
We install or repair pipe, valves, heads and wiring with the right parts for each zone, flush the lines and keep the site tidy as we work.
We program the controller, test every zone with you, walk through watering and winterizing in plain steps and set a reminder for your next check.
Look for brown or soggy patches, heads that spray unevenly or not at all, a zone that will not run and a bill that jumps.
Yes. We work on all common brands and layouts and match parts to what you have.
Many repairs take an hour or two. Larger problems like buried line breaks take longer.
Often yes. If the pipe and valves are sound, repairs are far less than a new system. We tell you honestly.
We schedule as quickly as we can and prioritize leaks and flooding. Call and we will tell you when we can be there.
Zone Not WorkingA dead or stuck zone traced through the controller, wiring, solenoid and valve, then repaired so the area…Explore 
Head ReplacementCracked, sunken, stuck or sheared sprinkler heads replaced with matching parts and adjusted so spray reaches the right…Explore 
Leak Detection and RepairHidden leaks found with careful testing and repaired with minimal digging, so you stop wasting water and stop…Explore 
Emergency RepairUrgent help for geysers, flooding, runaway zones and frozen or broken lines, with quick shut-off advice and fast…Explore Tell us about the project and we will call you back to talk it through.
Or call (615) 357-7797 to talk now.
